Why Is Your Washing Machine Taking So Long to Finish a Cycle?

 

Why Is Your Washing Machine Taking So Long to Finish a Cycle?

A washing machine is meant to save you time and effort, but what do you do when it does the opposite? If your laundry cycles are taking much longer than before, it might be more than just a small problem. Longer wash cycles can disrupt your daily schedule and may also indicate deeper issues with the machine.

Many people looking for washing machine installation in Calicut are noticing that their machines take a long time to finish a simple wash. Whether you have just installed a new machine or are using an older one, knowing why your washer is slowing down can help you fix the problem before it gets worse.

Common Reasons for Longer Wash Cycles

Several reasons can make your washing machine take more time than you expect. Here are the most common ones:

1. Unbalanced Loads

If your clothes are not evenly spread in the drum, the washing machine will try to balance itself—sometimes multiple times—before it can continue. This is especially common in top-loaders and can really increase the cycle time.

Tip: Spread heavier and lighter items evenly and avoid washing just one large item like a blanket or rug alone.

2. Too Much Detergent

Using more detergent does not mean cleaner clothes. In fact, it can create too many suds, which the machine will try to rinse out by extending the rinse and spin cycles.

Tip: Always use the amount of detergent recommended by the manufacturer for your machine type.

3. Low Water Pressure

Washing machines need steady water pressure to fill the drum quickly. If your home has low water pressure, the machine may take longer to fill, especially during rinse cycles.

Tip: Check if other taps in your home also have low pressure. If they do, you may need to call a plumber to fix the problem.

4. Clogged or Dirty Filters

A clogged inlet filter or drain filter can block water flow in or out of the machine. This can lead to longer fill times, slow drainage, and a machine that seems stuck during a cycle.

Tip: Clean the inlet and drain filters at least once every few months to keep the machine running well.

5. Sensor or Control Board Issues

Modern washing machines have sensors that detect load size, water level, and dirt level. If a sensor is not working right, it may send wrong signals to the control board, causing unusually long cycles.

Tip: If your machine consistently takes too long despite proper use, a technician should check the electronics.

6. Energy-Efficient Modes

Some eco-friendly modes are designed to use less water and energy, making the cycle longer. These settings clean gently but can add 30 to 60 minutes to a wash.

Tip: Switch to a normal or quick cycle if you are in a hurry and don’t need a deep clean.

7. Improper Installation

If you’ve recently changed your home or had your washer set up incorrectly, it could impact how the washer drains or fills, which can lead to longer cycles. Not leveling it properly can also cause shaking problems that interrupt the washing process.

Tip: Always make sure your washer is set up by experts. If you’re new to the area, look for reliable washing machine installation in Calicut to have it done right.

Conclusion

If your washing machine is taking too long on every load and messing up your daily routine, it’s time to find out why. Whether it's a technical issue, a setup problem, or a maintenance need, getting a professional diagnosis is often the first step.

That’s where Fixail comes in. As a top name in appliance services, Fixail provides expert washing machine installation, repair, and maintenance throughout Calicut. Our skilled technicians will not only fix the current problem but also give you tips on how to keep your appliance working well.

Don't let slow wash cycles waste your time—schedule a service with Fixail today and restore speed and dependability to your laundry routine.